All engineering, manufacturing, quality and sales efforts are wasted if your transport packaging fails and your customer receives a damaged product'(ISTA).! 25.1 Introduction: the supply chain for perishable foods Food is a perishable product. It is temperature-, moisture-, and time-sensitive, compared to books, automobile parts, and clothes, however they are shipped

24.1 Introduction: the problem of plastic packaging waste Polymers and plastics are typical materials of the last century and have made a tremendous growth of some hundreds of tons/year at the beginning of the 1930s to more than 150 million tons/year at the end of the 20th century with 220 million tons forecast by 2005. Western Europe will account for 19% of that amount. Today

Food packaging is a still growing market As a consequence, the demand to re-use post-consumer packaging materials grows as well. Recycling of packaging materials plays an increasing role in packaging, and numerous applications can already be found on the market. Ten or twenty years ago most post-consumer packaging waste was going into landfill sites or to incineration

Major technological developments in food packaging can introduce many benefits to consumers and food and food-packaging industries, but at the same time they are liable to the introduction of new problems. Although active and intelligent packaging continues to broaden in scope and these new packaging systems are already being successfully applied in the USA, Japan and Australia its penetration in the European

Package design has great significance for the success of foodstuffs nowadays. Packages are clearly an integral part of the manufacturing and distribution processes. As clothes speak for their wearers, so too packages speak for the packed food product. Packages are developed not only to make weekdays easier for the consumer, but also to make times of celebration more festive. Many food products would not be in shops and on dining tables, if they had not been packed. Nowadays packages face difficult challenges and roles. They have to create the ambience that hitherto was forged by personal service. Packages replace the salesman

Consumer satisfaction is related to fresh product quality. This quality is generally associated with visual appearance, colour being one of the most important aspects in the consumer's purchase decision. The association of certain colours with the acceptance of fruits and vegetables begins early and is maintained through life. For instance, when the red colour of fruit is enhanced, the perceived sweetness level increases. Colour is normally used to determine

The colour stability of meat products is influenced by a large number of factors some of biochemical nature, some due to handling during slaughter and processing, and others due to packaging and storage conditions. This chapter focuses on modelling how colour shelf-life is affected by the external factors applied during packaging and storage. However, meat from different sources shows different tendencies to undergo colour deterioration and this variation in internal factors influences the developed models. Therefore some consideration will also be given to discussing how internal factors like

Fresh fish products are usually more perishable than most other foodstuffs due to their high aw, neutral pH, and presence of autolytic enzymes. The spoilage of fish and shellfish results from changes caused by oxidation of lipids, reactions due to activities of the fishes'own enzymes, and the metabolic activities of microorganisms (Ashie et al., 1996). The rate of deterioration is highly temperature dependent and can be inhibited by the use of low storage

Preservative packagings for fresh meats should maintain acceptable appearance odour and flavour for product, while allowing the development of desirable characteristics associated with ageing and retarding the onset of microbial spoilage(Taylor, 1985). Such effects can be achieved by packaging meats under various atmospheres of oxygen, carbon dioxide, carbon monoxide and/or nitrogen. The atmosphere within a pack may alter during storage, because of reactions between components of the atmosphere and the product, and/or because of transmission of gases into or out of the pack through the packaging

Conceptual models are descriptions of our understanding of system that are used to shape the implementation of solutions to problems. 58 The quality and quantum of innovation that will occur in development of modified atmosphere packaging (MAP) strongly depends upon the insights gained from robust conceptual models of components of MAP. In this chapter, we outline a number of simple principles about modified atmosphere(MA) systems that we believe will assist industries that apply MA technology to move beyond the rather