In this problem we will study the effects of adding rules to the rule- base. Suppose that we use seven triangular membership functions on each universe of discourse and make them uniformly distributed in the same manner as how we did in Exercise 2.3. In particular make the points at which the outermost input membership functions for e saturate at +r/2 and for e at tr/4 For u make the outermost ones have their peaks

this problem you will study how to represent various concepts and quantify various relations with membership functions when there is more than one universe of discourse. Use minimum to quantify the\and.\For each part below, there is more than one correct answer. Provide one of these and justify your choice in each case. Also, in each case draw the three-dimensional

problem you will study how to represent various concepts and quantify various relations with membership functions. For each part below, there is more than one correct answer. Provide one of these and justify your choice in each case. (a)Draw a membership function (and hence define a fuzzy set) that quantifies the set of all people of medium height

Exercise 2.3(Inverted Pendulum: Gaussian Membership Functions): Suppose that for the inverted pendulum example, we use Gaussian membership functions as defined in Table 2. 4 on page 53 rather than the triangular membership functions. To do this, use the same center values as we had for the triangular membership functions, use the\left\and\right\membership functions shown in Table 2. 4 for the outer edges of the input

一、填空(本题25分) 1.共射共集共基 2.饱和区截止区放大区正偏反偏 3.锗PNP集电基射 4.提高降低加宽减小增大 5.多级放大电路单级放大电路

一、填空(本题25分) 1.对共射、共集和共基三种组态放大电路,若希望电压放大倍数大,可选用 组态;若希望带负载能力强,应选用 组态;若希望高頻性 能好,应选用 组态

一、填空(本题25分) 1.互导互导增益互阻AR=o 2.饱和区截止区放大区正偏反偏 3.GB≥50MHz 4.提高降低加宽增大减小

一、填空(本题25分) 1.把电压信号转换为电流输出的电路称 放大电路,A=1o/ 称 利用 放大电路可将电流信号转换为电压信号, 其增益表达式为 2.晶体三极管的输出特性曲线一般分为三个区,即: ,要使三极管工作在放大区必须给发射 结加_ 、集电结加

一、填空(本题28分) 1.PN结的伏安特性方程i= ,表明PN结 导电性。 2.放大电路中,已知三极管三个电极的对地电位为UA=-9V,UB=-6.2V, Uc=-6V,则该三极管是 型三极管,A为 极, B为 极,C为 极

一、选择填空(选择一个正确答案填在扩号内,每小题5分,共30分) 1、为了使高内阻信号源与低阻负载能很好的配合,可以在信号源与低阻负载间接入