第一节吸附法 第二节离子交换法 第三节萃取法 第四节膜析法

第一节化学混凝法 第二节中和法 第三节化学沉淀法 第四节氧化还原法

一、概述 二、原理 三、主要构筑物及工艺 四、厌氧生物处理法的设计

大自然的启示:如果让污水进入天然水体,可通过水体中微生态系 统的自净功能得到处理。 1882年就有人做向污水中鼓入空气的试验; 1912年美 Lawlence国的研究所进行污水曝气试验;英国的 Fowler 访问该研究所回国后,让Clark和Gage进行试验,发现,对污水 长时间曝气会产生一些絮状体,同时水质会得到明显的改善, ArdernLockett和继续对这一现象进行了研究,曝气试验是在瓶中 进行的,每天试验结束时把瓶子倒空,第二天重新开始,他们发现 由于瓶子清洗不完善,瓶壁附着一些棕褐色的絮状体时,处理效果 反而好

本标准规定了水处理设备的产品分类,设备的设计、制造、检验,性能试验方法以及标志、包装、运输、贮存等要求

6-1 Role of chemical Unit Processes In Wastewater Treatment The principal chemical unit processes used for wastewater treatment include(1)chemical coagulation, (2) chemical precipitation, (3)chemical disinfection, (4) chemical oxidation, (5)advanced oxidation processes, (6)ion exchange

Operations used for the treatment of wastewater in which change is brought about by means of or through the application of physical forces are known as physical unit operations. Because physical unit operations were derived originally from observations of the physical world. they were the first treatment methods to be used. Today, physical unit operations, as shown on Fig. 5-1, are a major part of most wastewater

The constituents of concern found in wastewater are removed by physical, chemical, and biological methods. The individual methods usually are classified as physical unit operations, chemical unit processes, and biological unit ds in which the application of physical forces ohysical unit operations include pr T3clarifiers

Determining wastewater flowrates and constituent mass loadings is a fundamental step in initiating the conceptual process design of wastewater treatment facilities. Reliable data for existing and projected flowrates affect the hydraulic characteristics, sizing, and operational considerations of the treatment system components. Constituent mass loading, the product of constituent concentration and flowrate

An understanding of the nature of wastewater is essential in the design and operation of collection, treatment, and reuse facilities, and in the engineering management of environmental quality. To promote this understanding, the information in this chapter is presented in eight sections dealing with (1)an introduction to the constituents found in wastewater, (2)sampling and analytical procedures, (3) physical characteristics, (4)inorganic nonmetallic constituents, (5) metallic constituents