Write a compact sentence that describes the molecular origin of gas pressure, including its temperature and mass dependence. [51 A: P is due to change in momentum Ap = m Av of molecules striking a surface velocity Increases as VTm
文件格式: PDF大小: 551.83KB页数: 7
Microelectronics Processing Technology Spring Term, 200. Quiz 1 90 min/90 points total March 19 2003 Note: Be brief and relevant in your answers, and use sketches. Show your work. k=1.3810-23J/K=8.6210-eV/K 40 1. Film deposition, CVD )Discuss briefly what factors affect the microstructure a film grown on a substrate
文件格式: PDF大小: 278.24KB页数: 12
Gas flux across concentration gradient: J=h(Cg-Cs ), Cs=concentration at surface Flux for chemical reaction: J(#/vol s)=k Cs, where k=koexp[-AG/(kBT)I Film growth velos/ hk ii where Nr is number of deposited species/cm Diffusio
文件格式: PDF大小: 114.09KB页数: 1
1. You need to deposit a high quality (low electrical resistivity) Al film at a very high rate(v> I micron/min) and achieve good step coveage using sputter deposition. Referring to information in the class notes and text, answer the following three questions. (Grade will depend more on how you justify your design, rather than on its
文件格式: PDF大小: 321.21KB页数: 2
Sputter deposition: Read Plummer Chap 9, Sections 9.2.2.2 to 9.3.10. Consider reading Ohring 1. You need to deposit a high quality (low electrical resistivity) Al film at a very high rate(v> I micron/min) and achieve good step coveage using sputter deposition
文件格式: PDF大小: 277.09KB页数: 3
1.(Plummer 10.3)In a certain process, it is desired that the pitch of metal lines be equal to or less than 1.Omm(the pitch equals one metal linewidth plus one spacing between metal lines, measured at top of features). Assume that the metal linewidth and spacing are
文件格式: PDF大小: 101.7KB页数: 3
All the questions are from Plummer, Chapter 10, p.679-680, which was handed out in class 1)Question 10.3 2) Question 10.4 3)Question 10.5 4) Question 10.6
文件格式: PDF大小: 49.56KB页数: 1
I. Plot resolution and depth of field as a function of exposure wavelength for a projection aligner with 100nm< A <500nm. Assume NA=0.26. Recalculate on the same plot for NA=0.41. Discuss the implication of these plots for the technologist that must manufacture transistors with 0.5 um
文件格式: PDF大小: 180.62KB页数: 3
1)Plot resolution and depth of field as a function of exposure wavelength for a projection aligner with 100nm
文件格式: PDF大小: 76.16KB页数: 1
Problem 1 Deal-Grove model states that the thickness of the oxide is related to a time constant r and two constants A and b by the relation
文件格式: PDF大小: 267.12KB页数: 3
©2025 mall.hezhiquan.com 和泉文库
帮助反馈侵权