References 161 [651 O'Connor,J.E.,"Polyphenylene Sulfide:Resin.Prepreg and High Performance Composites",SPI Reinforced Plastics/Composites Proceedings 39.11E (1984). I66] "XSC40-66 PAS-2 Resin-Continuous Carbon Fiber Unidirectional Prepreg Tape". Phillips 66 Co.,Datasheet 1398-8801(1988). [671 "Avimid N:An Innovative Composite Tooling for High Temperature Advanced Composites".Dupont Co.,Datasheet H-16030. I68 "Avimid N Composite Tool:Recommended Manufacturing Procedures".Dupont Co., Datasheet H-14464. I69] "Eymyd Resins",Ethyl Corporation,Datasheet CD-143(489). 1701 "Super Heat-Resistant,Thermoplastic Polyimide New-TPI",Mitsui Toatsu Chemicals Inc.,Datasheet. 71 Varughese,B..Muzzy.J.and Baucom.R.M.."Combining Larc-TPI Powder with Carbon Fiber by Electrostatic Fluidized Bed Coating",21st International SAMPE Technical Conference.pp.536-543 (Sept.25-28.1989). [721 Jones.J.F.,Waldrop.J.C.and Fountain.R.."High Temperature Resistant Polybenzimidazole Composites for Missile Applicatlons",29th National SAMPE Symposium,pp.777-783 (Aprll 3-5,1984). I731 "Coefficient of Linear Thermal Expansion of Ryton Composites".Phillips 66 Co., Datasheet812-88A01(1988). [74 Leach,D.C..Cogswell,F.N.and Nield.E.."High Temperature Performance of Thermoplastic Aromatic Polymer Composites",31st International SAMPE Symposium,pp.434-448 (April 7-10,1986). 751 Cogswell,F.N.,Leach.D.C..McGrail,P.T..Colquhoun,H.M..MacKenzie.P.and Turner, RM.,"Semi-Crystalline Thermoplastic Matrix Composites for Service at 350 F".32nd International SAMPE Symposlum.pp.382-395 (April 6-9.1987). I76 "Encyclopedia of Polymer Science and Engineering".John Wiley Sons Inc..Second Edition,Vol.10(1985)
References 161 1651 1661 1671 1681 1691 [701 1711 1721 I731 I741 1751 1761 O’Connor, J.E.. “Polyphenylene Sulfide: Resin, Prepreg and High Performance Composites”, SPI Reinforced Plastics/Composites Proceedings 39, 11E 11984). “XSC40-66 PAS-2 Resin-Continuous Carbon Fiber Unidirectional Prepreg Tape”, Phillips 66 Co., Datasheet 1398-8801 (1988). “Avlrnid N: An Innovative Composite Tooling for High Temperature Advanced Composites”, DuPont Co., Datasheet H- 16030. “Avimid N Composite Tool: Recommended Manufacturing Procedures”, DuPont Co., Datasheet H-14464. ‘Eyrnyd Resins”, Ethyl Corporation, Datasheet CD- 143 14891. “Super Heat-Resistant, Thermoplastic Polyimide New-TPI”. Mitsui Toatsu Chemicals Inc.. Datasheet. Varughese, B.. Muzzy. J. and Baucom. RM.. “Combining Larc-TPI Powder with Carbon Fiber by Electrostatic Fluidized Bed Coating”, 2 1st International SAMPE Technical Conference, pp. 536 - 543 (Sept. 25 - 28.1989). Jones, J.F., Waldrop. J.C. and Fountain, R., “High Temperature Resistant Polybenzimidazole Composites for Missile Applications”, 29th National SAMPE Symposium, pp. 777 - 783 (April 3 - 5, 1984). “Coefficient of Linear Thermal Expansion of Ryton Composites”, Phillips 66 Co.. Datasheet 812-88AOl (1988). Leach, D.C., Cogswell. F.N. and Nield. E., “High Temperature Performance of Thermoplastic Aromatic Polymer Composites”, 3 1st International SAMPE Symposium, pp. 434 - 448 (April 7 - 10, 1986). Cogswell. F.N.. Leach, D.C.. McGrail. P.T., Colquhoun. H.M.. MacKenzie, P. and Turner. RM.. “Semi-Crystalline Thermoplastic Matrix Composites for Service at 350” F’, 32nd International SAMPE Symposium. pp. 382 - 395 (April 6 - 9. 1987). “Encyclopedia of Polymer Science and Engineering”, John Wiley & Sons Inc., Second Edition, Vol. 10 (1985)
162 High Performance Thermoplastic Resins and Their Composites 77] Leeser,D.and Banister,B.."Amorphous Thermoplastic Matrix Composites for New Applications",21st International SAMPE Technical Conference,pp.507-513(Sept.25- 28.1989). I781 Knight,G.J.and Wright,W.W.."Comparison of the Thermal Stabilities of Some Resin Matrices for Composites",British Polymer Journal,21.pp.303-311 (1989). 79] Scola.D.A.,'The Status of High Temperature Polymers for Composites-Likely Candidates",34th International SAMPE Symposium.pp.246-258(May 8-11,1989). 801 St-Clair,T.L.,Johnston,N.J.and Baucom,R.M.."High Performance Composites Research at Nasa-Langley".NASA Technical Memorandum 100518(January 1988). [811 Pao,P.S.,O'Neal,J.E.and Wolf,C.J.,"Fatigue Crack Growth In Poly(aryl-ethier-ether- ketone)(PEEK)and PEEK Composites",Polymeric Materials Science and Engineering, 53.pp.677-682(1985. I821 Cole.B.."Torlon-C Graphite Composites".30th National SAMPE Symposium,pp.799- 808 March19-21,1985). f83 Grenier,M-F.,Barnaud,M..Biensan,M..Gensous,F.Ludi,M.and Tremillon.J-M., "Composites a Matrices Polyimides Thermoplastiques:Mecanismes de Polymerisation ct Proprietes",Makromol.Chem.,Macromol.Sympo.,9.pp.9-25(1987). I84 JJohnston.N.J.."Synthesis and Toughness Properties of Resin and Composites".NASA Conference Publication 2321,pp.75-95(1984). I851 Hartness.J.T.and Kim.R.Y.,"A Comparative Study on Fatigue Behavior of Polyetheretherketone and Epoxy with Reinforced Graphite Cloth".28th National SAMPE Symposium and Exhibition,pp.535-544 (April 12-14,1983). I861 "Victrex PEK",ICI Advanced Materials,Datasheet VP1/1086(1986). 187] St-Clair.A.K.and St-Clair.T.L.."Larc-TPI a Multi-Purpose Polyimide".NASA Technical Memorandum 84516 (June 1982). [881 Wu,J.S.,Friedrich,K.and Grosso,M.."Impact Behavior of Short Fibre Liquid Crystal Polymer Composites",Composites,Vol.20.No.3.pp.223-233 (May 1989). [89] Xiao.X.."Studies of the Viscoelastic Behavior of a Thermoplastic Resin Composite". Composites Sciencc and Technology,Vol.34.pp.163-182 (1989)
162 High Performance Thermoplastic Resins and Their Composites I771 I781 [791 I801 E311 I821 1831 I841 I851 WI 1871 w31 WI Leeser, D. and Banister, B., “Amorphous Thermoplastic Matrix Composites for New Applications”, 2 1st International SAMPE Technical Conference, pp. 507 - 513 (Sept. 25 - 28. 1989). Knight, G.J. and Wright, W.W.. “Comparison of the Thermal Stabilities of Some Resin Matrices for Composites”, British Polymer Journal, 2 1, pp. 303 - 3 11 (1989). Scala, D.A., ‘The Status of High Temperature Polymers for Composites - Likely Candidates”, 34th International SAMPE Symposium, pp. 246 - 258 (May 8 - 11. 1989). St-Clair, T.L., Johnston, N.J. and Baucom. RM., “High Performance Composites Research at Nasa-Langley”. NASATechnical Memorandum 100518 (January 1988). Pao, P.S., O’Neal, J.E. and Wolf, C.J.. “Fatigue Crack Growth in Poly(axyl-ether-etherketone) (PEEK) and PEEK Composites”, Polymeric Materials Science and Engineering, 53, pp. 677 - 682 (1985). Cole, B.. ‘Torlon-C Graphite Composites”, 30th National SAMPE Symposium. pp. 799 - 808 (March 19 - 21, 1985). Grenier, M-F., Bamaud, M., Biensan. M., Gensous, F, Ludi. M. and Tremillon, J-M., “Composites a Matrices Polyimides Thermoplastiques: Mecanismes de Polymerisation et Proprittes”, Makromol. Chem.. Macromol. Sympo.. 9, pp. 9 - 25 (1987). Johnston, N.J., “Synthesis and Toughness Properties of Resin and Composites”, NASA Conference Publication 232 1, pp. 75 - 95 (1984). Hartness, J.T. and Kim. R.Y., “A Comparative Study on Fatigue Behavior of Polyetheretherketone and Epoxy with Reinforced Graphite Cloth”, 28th National SAMPE Symposium and Exhibition, pp. 535 - 544 (April 12 - 14. 1983). “Victrex PER’, ICI Advanced Materials, Datasheet VPl/ 1086 (19861. St-Clan-. A.K. and St-Clair, T.L.. “Larc-TPI a Multi-Purpose Polyimide”, NASA Technical Memorandum 84516 (June 19821. Wu. J.S., Friedrich, K. and Grosso. M., “Impact Behavior of Short Fibre / Liquid Crystal Polymer Composites”, Composites, Vol. 20. No. 3. pp. 223 - 233 (May 19891. Xiao, X.. “Studies of the Viscoelastic Behavior of a Thermoplastic Resin Composite”, Composites Science and Technology, Vol. 34. pp. 163 - 182 (1989)
References 163 I901 Lou,A.Y.,"Effects of Time and Temperature on Glass Fiber Reinforced PPS Stampable Composites".3rd Annual ASM/ESD Advanced Composites Conference and Exposition Sept.15-17.1987). [911 "Encyclopedia of Polymer Science and Engineering".John wiley Sons Inc.,Second Edition,Vol.3(1985). I921 "Encyclopedia of Polymer Science and Engineering".John Wiley Sons Inc.,Second Edition,Vol.1 (1985). [931 Kays,A.O.and Hunter,J.D.,"Characterization of Some Solvent-Resistant Thermoplastlc Matrix Composites",Composite Materials:Quality Assurance and Processing.ASTM STP 797.pp.119-132(1983). I94 Hergenrother,P.M..Jensen,B.J.and Havens.S.J.."Thermoplastic Composite Matrices with Improved Solvent Reststance".SAMPE Journal.pp.18-23(Sept./Oct.1984). I95] Beland,S.,Komorowski,J.P.and Roy C.."Hygrothermal Influence on the Interlaminar Fracture Energy of Graphite Bismalimide Modified Epoxy Composite (IM6/5245C)". Proceedings of the Sixth International Conference on Composite Materials,Vol.3.pp. 306-316(1987. I961 Wang.9.and Springer,G.S.,"Moisture Absorption and Fracture Toughness of PEEK Polymer and Graphite Fiber Reinforced PEEK".Journal of Composite Materials,Vol. 23.pp.434-447May1989). 97] Komorowski,J.P.and Beland.S.."Moisture Diffusion in Graphite Bismalimide- Modified-Epoxy Composite IM6/5245C",Canadian Aeronautics and Space Journal, Vol.32.No.3.pp.218-226(Sept.1986). I98 Silverman,E.M.and Jones.R.J.."Property and Processing Performance of Graphite/PEEK Prepreg Tapes and Fabrics",SAMPE Journal,pp.33-40(July/Aug 1988). I99 Cogswell.F.N.and Hopprich.M.,"Environmental Resistance of Carbon Fibre Reinforced Polyetheretherketone",Symposlum on Environmental Effects on Fibre Reinforced Plastics.pp.251-253 (July 1983). [1001 Nguyen,H.X.and Ishida,H.,"Poly(Aryl-Ether-Ether-Ketone)and Its Advanced Composites:A Review".Polymer Composites.Vol.8.No.2.pp.57-73 (April 1987)
References 163 WI Lou. A.Y., “Effects of Time and Temperature on Glass Fiber Reinforced PPS Stampable Composites”. 3rd Annual ASM/ESD Advanced Composites Conference and Exposition (Sept. 15 - 17, 1987). 1911 “Encyclopedia of Polymer Science and Engineering”, John Wiley & Sons Inc., Second Edition, Vol. 3 (1985). 1921 “Encyclopedia of Polymer Science and Engineering”, John Wiley & Sons Inc., Second Edition, Vol. 1 (1985). WI Kays, A.O. and Hunter, J.D.. “Characterization of Some Solvent-Resistant Thermoplastic Matrix Composites”, Composite Materials: Quality Assurance and Processing, ASTM STP 797, pp. 119 - 132 (1983). 1941 Hergenrother, P.M., Jensen, B.J. and Havens, S.J., ‘Thermoplastic Composite Matrices with Improved Solvent Resistance”, SAMPE Journal. pp. 18 - 23 (Sept./Ott. 1984). 1951 Btland, S.. Komorowski, J.P. and Roy C., “Hygrothermal Influence on the Interlaminar Fracture Energy of Graphite / Bismalimide Modified Epoxy Composite (IM6/5245C)“. Proceedings of the Sixth International Conference on Composite Materials, Vol. 3. pp. 306 - 316 (1987). I961 Wang, Q. and Springer, G.S., “Moisture Absorption and Fracture Toughness of PEEK Polymer and Graphite Fiber Reinforced PEEK’, Journal of Composite Materials, Vol. 23, pp. 434 - 447 (May 1989). WI Komorowski. J.P. and Beland. S., “Moisture Diflusion in Graphite / Bismalimide - Modified - Epoxy Composite IM6/5245C”, Canadian Aeronautics and Space Journal. Vol. 32, No. 3, pp. 218 - 226 (Sept. 1986). WI Silverman, E.M. and Jones, R.J., “Property and Processing Performance of Graphite/PEEK Prepreg Tapes and Fabrics”, SAMPE Journal. pp. 33 - 40 (July/Aug 1988). I991 Cogswell. F.N. and Hopprich, M.. “Environmental Resistance of Carbon Fibre Reinforced Polyetheretherketone”. Symposium on Environmental Effects on Fibre Reinforced Plastics, pp. 251 - 253 (July 1983). [lOO] Nguyen, H.X. and Ishida. H., “Poly(Aryl-Ether-Ether-Ketone) and Its Advanced Composites: A Review”, Polymer Composites, Vol. 8, No. 2, pp. 57 - 73 (April 1987)