查询CD4027B供应商 φ TEXAS INSTRUMENTS CD4027B Types CMOS Dual J-K F n Set-Reset capability Master-Slave Flip-Flop a Static flip-flop operation-retains state indefin with clock level either"high"or"low High-Voltage Types(20-Volt Rating) Medium speed operation-16 MHz (typ. clock toggle rate at 10 V a CD40278 is a single monolithic Standardized symmetrical output characteristi chip integrated circuit cont cal complementary- sy mmetry jK master. -100% tested for quiescent current at 20 V ave flip-flops. Each flip-flop has pro Maximum input current of 1 HA at 18 V ove sions for individual J, K. Set, Reset. full package-temperature range: 100 nA at Clock input signals. Buffered Q and Q signals are provided as ou ts. This input utput arrangement provides for compatible n Noise margin (over full package operation with the RCA-CD4013B dual D 1 at VDD- 5V 2 V at VDD = V Functional Diagram The CD4027B is useful in perfor ming con- trol, register, and toggle functions. Logic 2.5 V at VDD-15 V levels present at the J and K inputs along 5-V, 10-V, and 15-V parametric ratings with internal self-steering control the stat a Meets all requirements of JEDEC of each flip-flop: changes in the flip-flop state are synchronous with the positive Standard No, 138,""Standard Specifications oing transition of the clock pulse. Set and for Description of'B' Series CMOS Devices eset functions are independent of the clock Applications and are initiated when a high level signal is Registers, counters, control cireui present at either the Set or Reset input. The CD4027B types are supplied in 16-lead (F3A suf 16-lead dual-in-line plastic packages (E suffix), 16-lead small-outline ackages(M, M96, MT, and NSR suffixes), and 16-lead thin shrink small-outline packages(Pw a2 and PwR suffixes) MAXIMUM RATINGS. Absolute-Maximum values: DC SUPPLY-VOLTAGE RANGE, (VoD) outages referenced to Vss Terminan) INPUT VOLTAGE RANGE, ALL INPUTS 4.05vDD+05V DC INPUT CURRENT, ANY ONE INPUT POWER DISSIPATION PER PACKAGE (PD) FoTA=-55°cto+10 500mw For TA=+100to+125°c Derate Linearity at 12mw/oC to 200mw TERMINAL ASSIGNMENT DEVICE DISSIPATION PER OUTPUT TRANSISTOR FOR TA-FULL PACKAGE-TEMPERATURE RANGE (All Package Types). OPERATING-TEMPERATURE RANGE (TA) -55cto+125°c STORAGE TEMPERATURE RANGE(Tstg) 65octo+150°c LEAD TEMPERATURE (DURING SOLDERINGE At distance 1/16+1/32 inch(1, 59* 0. 79mm)from case for 10a max L 2(4 Fig 1- Logic diagam ad truth table for CD40278 lone of nwo identical J-K flip flops) 3-76
Data sheet acquired from Harris Semiconductor SCHS032C − Revised October 2003 The CD4027B types are supplied in 16-lead hermetic dual-in-line ceramic packages (F3A suffix), 16-lead dual-in-line plastic packages (E suffix), 16-lead small-outline packages (M, M96, MT, and NSR suffixes), and 16-lead thin shrink small-outline packages (PW and PWR suffixes). Copyright 2003, Texas Instruments Incorporated 查询CD4027B供应商
CD4027B Types RECOMMENDED OPERATING CONDITIONS at TA=25C, Except as Noted For maximum reliability, nominal operating conditions should be selected so that operation is a/ways within the following ranges: MITS CHARACTERISTIC VDD UNITS Supply- Voltage Range (For TA Full Package Temperature Range 8 v 200 Data Setup Time 1550 urant characteristics Clock Pulse Width Clock Input Frequency(Toggle Mode) fcL10 8 MHZ Clock Rise or Fall Ti tcL∴tcL10 Set or Reset Pulse Width ouNCE vOLTAg Dg If more than one unit is cascaded in a parallel clocked operation, t cl should be made less 15 pF and the time of the output driving stage for the estimated capacitive load b向A-T0-s0 LACE VOLTAGE ( VD5-￥ ATCENT TEMPERTTUTCAR 「瞳到 REQUENCTitrl-Hr Fig. 4-Typical output high source Fig.5-Minimum output high (gourde Fi.6-Typical power dissipation w. frequency Fig 7-Input cument test circuit Fig8-Input voltage test circuit. Fig 9- Quiescent device current test circuit. 3-77
CD4027B Types STATIC ELECTRICAL CHARACTERISTICS CHARAC. TERISTIC LIMITS AT INDICATED TEMPERATURES (o, UNITS N)|0|c)-55-40+851+125 Typ.I M Quiescent 30 002 60 002 120120 0024 DD Max o20202020 0640610420.3601 Output High 64L061-04 18[-131 115-16 -3.2 Current 高巒計哥翌 Output Volt 0.05 Low-L 0.1010 0005 0,1515 010.05 Output: Volt 95 4955 High-Level 01010 995 99510 Input Low 0.5,4.5 Voltage, put High.5. 4 3.5 Voltage, uHMn.|15.135 Current 0,1818±0.1±0.1±1|± ±10-5±0.1A 4050607 下N哑_四 nsions in millimeters are derived from the basic inch dimensions as indicated. Grid graduations are in mils (10- a5-52n 3 4 o.l02-0254 2007-2209 Dimensions and Pad Layout for CD4027BH 92cs-35059
CD402 7B Types DYNAMIC ELECTRICAL CHARACTERISTICS at TA=25C; Input tr t=20 ns, 辅醋 CL-50 pF, RL=200 kS2 LIMITS CHARACTERISTIC UNITS Clock to Q or Q Outputs M505 65130 PHL, tPLH 50300 Set to Q or Reset to Q tPLH 45 90 200 CLOCK。 r RESET to O 60 120 Transition Time tTHL, tTLH 5055056 50100 睡辑 Maximum Clock inp 3.5 旦 12 70140 Minimum Clock Pulse Width tw10 20 8s=8w8 Minimum Set or Reset Pulse 5 90180 喜 Width Fig. 11 itance / SET to a 25 50 RESET to 00200 Minimum Data Setup Time ts 3575 Clock Input Rise or Fall Time 05505 5 Input Capacitance Cl Fig. 12-Typical maximum clock frequency vs
PACKAGE OPTION ADDENDUM RUMENTS 170ct2005 PACKAGING INFORMATION Orderable Device Status(1) Package Package Pins Package Eco Plan(2) Lead/Ball Finish MSL Peak Temp 3) CD4027BE ACTIVE PDIP 1625 CU niPDaU Level-NC-NC-NC RoH CD4027BEE4 ACTIVE CU NIPDaU Level-NC-NC-NC (RoHS) CD4027BF ACTIVE Call TI LeveI-NC-NC-NC CD4027BF3A ACTIVE CDIP Call TI Level-NC-NC-NC CD4027BM ACTIVE SOIC 16 40 Green(RoHS CU NIPDAU Level-1-260C-UNLIM no sb/Br) CD4027BM96 ACTIVE SOIC 16 2500 Green(RoHS& CU NIPDAU Level-1-260C-UNLIM CD4027BM96E4 ACTIVE SOIC DDDDDD 16 2500 Green( RoHS& CU NIPDAU Level-1-260C-UNLIM no sb/Br CD4027BME4 ACTIVE SOIC 16 40 Green(RoHS& CU NIPDAU Level-1-260C-UNLIM CD4027BMT ACTIVE SOIC 16 250 Green(RoHS& CU NIPDAU Level-1-260C-UNLIM no sb/Br) CD4027BMTE4 ACTIVE SOIC 16 250 Green(RoHS& CU NIPDAU Level-1-260C-UNLIM no sb/Br) CD4027BNSR ACTIVE SO NS 16 2000 Green(RoHS& CU NIPDAU Level-1-260C-UNLIM CD4027BNSRE4 ACTIVE So IS 16 2000 Green(RoHS& CU NIPDAU Level-1-260C-UNLIM no sb/B CD4027BPW ACTIVE TSSOP 16 90 Green(RoHS& CU NIPDAU Level-1-260C-UNLIM no sb/B CD4027BPWE4 ACTIVE TSSOP PW 16 90 Green( RoHS& CU NIPDAU Level-1-260C-UNLIM CD4027BPWR ACTIVE TSSOP 16 2000 Green( RoHS& CU NIPDAU Level-1-260C-UNLIM CD4027BPWRE4 ACTIVE TSSOP PW 16 2000 Green(RoHS& CU NIPDAU Level-1-260C-UNLIM JM3851005152BEA ACTIVE CDIP J TBD Call TI Level-NC-NC-NC LIFEBU marketing status values are defined as follows: BUY: TI has announced that the device will be discontinued, and a lifetime- buy period is in effect Not recommended for new designs. Device is in production to support existing customers, but Ti does not recommend using this part in a new design PREVIEW: Device has been announced but is not in production Samples may or may not be available OBSOLETE: Ti has discontinued the production of the device (2) Eco Plan The planned eco-friendly classification: Pb-Free (RoHS)or Green(RoHS no Sb/Br)- please check R test availability information and additional product content details e/Green conversion has not been defined TIs terms Lead-Free"or"Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the re ent that lead not exceed 0. 1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes Green(RoHS no sb/Br): TI defines "Green" to mean Pb-Free(RoHS compatible), and free of Bromine(Br) and Antimony(sb)based flame etardants(Br or Sb do not exceed 0. 1% by weight in homogeneous material) 6)MSL, Peak Temp. -The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder Addendum-Page 1
PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3) CD4027BE ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU Level-NC-NC-NC CD4027BEE4 ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU Level-NC-NC-NC CD4027BF ACTIVE CDIP J 16 1 TBD Call TI Level-NC-NC-NC CD4027BF3A ACTIVE CDIP J 16 1 TBD Call TI Level-NC-NC-NC CD4027BM ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM CD4027BM96 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM CD4027BM96E4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM CD4027BME4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM CD4027BMT ACTIVE SOIC D 16 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM CD4027BMTE4 ACTIVE SOIC D 16 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM CD4027BNSR ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM CD4027BNSRE4 ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM CD4027BPW ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM CD4027BPWE4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM CD4027BPWR ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM CD4027BPWRE4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM JM38510/05152BEA ACTIVE CDIP J 16 1 TBD Call TI Level-NC-NC-NC (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. PACKAGE OPTION ADDENDUM www.ti.com 17-Oct-2005 Addendum-Page 1