§9-1 压杆稳定的概念 (The basic concepts of columns) §9-3 其它支座条件下细长压杆的临界压力 (Euler’s Formula for other end conditions ) §9-2 两端铰支细长压杆的临界压力 (The Critical Load for a straight, uniform, axially loaded, pin-ended columns) §9-4 欧拉公式的应用范围•经验公式 (Applicable range for Euler’s formula • the experimental formula ) §9-5 压杆的稳定校核 (Check the stability of columns) §9-6 提高压杆稳定性的措施 (The measures to enhance the columns stability)

7-1应力状态概述 (Concepts of stress-state) 7-2平面应力状态分析-解析法 (Analysis of plane stress-state) 7-3平面应力状态分析-图解法 (Analysis of plane stress-state) 7-4三向应力状态分析 7-5平面应变状态分析 (Analysis of plane strain-state) 7-6广义胡克定律 (Generalized Hook's law) 7-7复杂应力状态的变形比能 (Strain-energy density in general stress-state 7-8强度理论(Failure criteria) 7-9莫尔强度理论 (Mohr's failure criterion)

§4-1 基本概念及工程实例 (Basic concepts and example problems) 第四章 弯曲内力 (Internal forces in beams) §4-3剪力方程和弯矩方程·剪力图和弯矩图 (Shear-force& bending-moment equations ; shear-force & bending- moment diagrams) §4-2 梁的剪力和弯矩(Shear- force and bending- moment in beams) §4-6 平面刚架和曲杆的内力图 (Internal diagrams for frame members & curved bars) §4-5 叠加原理作弯矩图 (Drawing bending-moment diagram by superposition method) §4-4 剪力、弯矩与分布荷载集度间 的关系(Relationships between load,shear force,and bending moment)

§6-1 基本概念及工程实例 （Basic concepts and example problems) §6-4用叠加法求弯曲变形 ( Beam deflections by superposition ) §6-3用积分法求弯曲变形 （Beam deflection by integration ) §6-2挠曲线的微分方程（Differential equation of the deflection curve) §6-5 静不定梁的解法(Solution methods for statically indeterminate beams) §6-6 提高弯曲刚度的措施 (The measures to strengthen rigidity)

§5-1 引言 ( Introduction) §5-2 纯弯曲时的正应力 (Normal stresses in pure beams ) §5-3 横力弯曲时的正应力(Normal stresses in transverse bending ) §5-4 梁的切应力及强度条件 (Shear stresses in beams and strength condition) 第五章 弯曲应力(Stresses in beams) §5-5 提高梁强度的主要措施（Measures to strengthen the strength of beams)

§12–1 非对称弯曲 (Unsymmetrical bending ） §12–2 开口薄壁杆件的切应力 弯曲中心 (Shear stress of open thin-wall members. Flexural center) 第十二章 弯曲的几个补充问题 (Additional remarks for bending）

§3-1 扭转的概念和实例 (Concepts and example problem of torsion) §3-2 扭转内力的计算 (Calculating internal force of torsion) §3-3 薄壁圆筒的扭转 (Torsion in thin—wall circular tube) §3-4 圆轴扭转的应力分析及强度条件 (Analyzing stress of circular bars & strength condition) §3-8 开口和闭合薄壁截面杆的自由扭转 (Free torsion of open and closed thin￾walled members) §3-5 圆杆在扭转时的变形 ·刚度条件 (Torsional deformation of circular bars & stiffness condition) §3-6 密圈螺旋弹簧的应力和变形 (Calculation of the stress and deformation in close-coiled helical springs) §3-7 非圆截面杆的扭转 (Torsion of noncircular prismatic bars)

(Axial tension & Compression, Shear) §2-1 轴向拉压的概念及实例 (Concepts and examples of axial tension & compression) 第二章 轴向拉伸和压缩 Chapter2 Axial Tension and Compression §2-2 内力计算 (Calculation of internal force) §2-3 应力及强度条件 (Stress and strength condition) §2-4 材料在拉伸和压缩时的力学性能 (Material properties in axial tension and compression) §2-5 拉压杆的变形计算 (Calculation of axial deformation) §2-6 拉压超静定问题 (Statically indeterminate problem of axially loaded members) §2-7 剪切变形(Shear deformation)

§8-1组合变形和叠加原理 (Combined deformation and superposition method) §8-2拉伸(压缩)与弯曲的组合 (Combined axial and flexural loads) §8-3偏心拉(压)截面核心(Eccentric loads &the kern (or core) of a section) §8-4扭转与弯曲的组合 (Combined torque and flexural loads)

§1-1 材料力学的任务及研究对象(The tasks and research objects of mechanics of materials) §1-2 变形固体的基本假设(The basic assumptions of deformable body ) §1-3 力、应力、应变和位移的基本概念 ( Basic concepts of force、stress、 strain and displacement) §1-4 杆件变形的基本形式 (The basic forms of deformation)