§11–1 交变应力与疲劳失效(Alternating stress and fatigue failure) §11–3 持久极限(Endurance limit) §11–2 交变应力的循环特征、应力幅和平 均应力(The cycle symbol,stress amplitude and mean stress for alternating stress） §11–4 影响持久极限的因素 (The effective factors of endurance limit ) §11–5 对称循环下构件的疲劳强度计算 (Calculation of the fatigue strength of the member under symmetric cycles) §11–6 持久极限曲线 (Enduring limit curve) §11–7 不对称循环下构件的疲劳强度计算 (Calculation of the fatigue strength of the member under unsymmetric cycles) §11–8 弯扭组合交变应力的强度计算 (Calculation of the strength of composit deformations)

§10-1 概述 (Instruction) §10-2 动静法的应用 (The application for method of dynamic equilibrium) §10-3 构件受冲击时的应力和变形（Stress and deformation by impact loading)

§9-1 压杆稳定的概念 (The basic concepts of columns) §9-3 其它支座条件下细长压杆的临界压力 (Euler’s Formula for other end conditions ) §9-2 两端铰支细长压杆的临界压力 (The Critical Load for a straight, uniform, axially loaded, pin-ended columns) §9-4 欧拉公式的应用范围•经验公式 (Applicable range for Euler’s formula • the experimental formula ) §9-5 压杆的稳定校核 (Check the stability of columns) §9-6 提高压杆稳定性的措施 (The measures to enhance the columns stability)

7-1应力状态概述 (Concepts of stress-state) 7-2平面应力状态分析-解析法 (Analysis of plane stress-state) 7-3平面应力状态分析-图解法 (Analysis of plane stress-state) 7-4三向应力状态分析 7-5平面应变状态分析 (Analysis of plane strain-state) 7-6广义胡克定律 (Generalized Hook's law) 7-7复杂应力状态的变形比能 (Strain-energy density in general stress-state 7-8强度理论(Failure criteria) 7-9莫尔强度理论 (Mohr's failure criterion)

§4-1 基本概念及工程实例 (Basic concepts and example problems) 第四章 弯曲内力 (Internal forces in beams) §4-3剪力方程和弯矩方程·剪力图和弯矩图 (Shear-force& bending-moment equations ; shear-force & bending- moment diagrams) §4-2 梁的剪力和弯矩(Shear- force and bending- moment in beams) §4-6 平面刚架和曲杆的内力图 (Internal diagrams for frame members & curved bars) §4-5 叠加原理作弯矩图 (Drawing bending-moment diagram by superposition method) §4-4 剪力、弯矩与分布荷载集度间 的关系(Relationships between load,shear force,and bending moment)

§6-1 基本概念及工程实例 （Basic concepts and example problems) §6-4用叠加法求弯曲变形 ( Beam deflections by superposition ) §6-3用积分法求弯曲变形 （Beam deflection by integration ) §6-2挠曲线的微分方程（Differential equation of the deflection curve) §6-5 静不定梁的解法(Solution methods for statically indeterminate beams) §6-6 提高弯曲刚度的措施 (The measures to strengthen rigidity)

§5-1 引言 ( Introduction) §5-2 纯弯曲时的正应力 (Normal stresses in pure beams ) §5-3 横力弯曲时的正应力(Normal stresses in transverse bending ) §5-4 梁的切应力及强度条件 (Shear stresses in beams and strength condition) 第五章 弯曲应力(Stresses in beams) §5-5 提高梁强度的主要措施（Measures to strengthen the strength of beams)

§12–1 非对称弯曲 (Unsymmetrical bending ） §12–2 开口薄壁杆件的切应力 弯曲中心 (Shear stress of open thin-wall members. Flexural center) 第十二章 弯曲的几个补充问题 (Additional remarks for bending）

§3-1 扭转的概念和实例 (Concepts and example problem of torsion) §3-2 扭转内力的计算 (Calculating internal force of torsion) §3-3 薄壁圆筒的扭转 (Torsion in thin—wall circular tube) §3-4 圆轴扭转的应力分析及强度条件 (Analyzing stress of circular bars & strength condition) §3-8 开口和闭合薄壁截面杆的自由扭转 (Free torsion of open and closed thin￾walled members) §3-5 圆杆在扭转时的变形 ·刚度条件 (Torsional deformation of circular bars & stiffness condition) §3-6 密圈螺旋弹簧的应力和变形 (Calculation of the stress and deformation in close-coiled helical springs) §3-7 非圆截面杆的扭转 (Torsion of noncircular prismatic bars)

(Axial tension & Compression, Shear) §2-1 轴向拉压的概念及实例 (Concepts and examples of axial tension & compression) 第二章 轴向拉伸和压缩 Chapter2 Axial Tension and Compression §2-2 内力计算 (Calculation of internal force) §2-3 应力及强度条件 (Stress and strength condition) §2-4 材料在拉伸和压缩时的力学性能 (Material properties in axial tension and compression) §2-5 拉压杆的变形计算 (Calculation of axial deformation) §2-6 拉压超静定问题 (Statically indeterminate problem of axially loaded members) §2-7 剪切变形(Shear deformation)