1. EMITTERFEATUREPower dissipation 2. BASE0625W(Tamb=25℃ 3. COLLECTORCollector current

1、请先登记 每组请先到前面讲台登记,请写清楚下面几项:组员、设计项目、实验台编号、开始实验时间,离开时写清楚离开时间

Guaranteed Zero Reading for OV Input on All Scales The Intersil ICL7106 and ICL7107 are high performance, low True Polarity at Zero for Precise Null Detection power, 312 digit A/D converters. Included are seven seg- 1pA Typical Input Current ment decoders, display drivers, a reference, and a clock

These circuits consist of four independent, high TSSOP14 (Thin Shrink Small Outline e Package) gain, intemally frequency compensated operation al amplifiers. They operate from a single power supply over a wide range of voltages. Operation

1、设计任务 设计一个测量系统(或者加入控制部分,构成测控系统)并实现它,最后要对系统进行校准。要求包括完整的设计,含传感器、信号调理电路、数字显示以及电源部分,如下图:

General Description de range of applica is local on card bypassing is needed only if the regulator is located far from 9 gulation, eliminating the distribution problems associated the filter capacitor of the power supply

直流稳压电源的调试 1、数据处理(5分) （1)半波整流及其滤波(含空载与接入负载测量结果绘制于同一个坐标系中波形:整流后、空载、接入负载后的波形(3个;1.5分,每个波形0.5)注意:波形的相对关系;(相对关系不对扣0.5)

一、如何知道机器行走的距离?

一、了解典型机电一体化产品的设计思想。 二、认识用光电编码器测量平面位移的方法。 三、培养分析评价机电产品的初步能力

TWO-Terminal Ic DEVICES Temperature Transducer AD590 FEATURES PIN DESIGNATIONS Linear Current Output: 1 HA/K Wide Range:-55C to+150C Probe Compatible Ceramic Sensor Package