Guaranteed Zero Reading for OV Input on All Scales The Intersil ICL7106 and ICL7107 are high performance, low True Polarity at Zero for Precise Null Detection power, 312 digit A/D converters. Included are seven seg- 1pA Typical Input Current ment decoders, display drivers, a reference, and a clock

These circuits consist of four independent, high TSSOP14 (Thin Shrink Small Outline e Package) gain, intemally frequency compensated operation al amplifiers. They operate from a single power supply over a wide range of voltages. Operation

General Description de range of applica is local on card bypassing is needed only if the regulator is located far from 9 gulation, eliminating the distribution problems associated the filter capacitor of the power supply

直流稳压电源的调试 1、数据处理(5分) （1)半波整流及其滤波(含空载与接入负载测量结果绘制于同一个坐标系中波形:整流后、空载、接入负载后的波形(3个;1.5分,每个波形0.5)注意:波形的相对关系;(相对关系不对扣0.5)

TWO-Terminal Ic DEVICES Temperature Transducer AD590 FEATURES PIN DESIGNATIONS Linear Current Output: 1 HA/K Wide Range:-55C to+150C Probe Compatible Ceramic Sensor Package

The OP07 is a precision operational amplifier with Ultra Low offset Voltage: 10uV for the OPO7A), input offset drift of 0. 2uv/C an Ultra Low Offset Voltage Drift0.2μ° put bias current of 0.7nA the wide inp o Ultra Stable vs. Time: 0.2u V/Month 110dB minimum(OP07A), plus high input Ultra L。wNo|e:035

General Description hese devices need only one external com ation capacitor at the output. Tthe LM? aged in the to-220 power package and is capable applications requiring other voltages, see LM137 data 4 supplying 1.5A of output current These regulators employ internal current limiting safe area Features a Thermal, short circuit and sa tually all overload conditions

General Description de range of applica is local on card bypassing is needed only if the regulator is located far from 9 gulation, eliminating the distribution problems associated the filter capacitor of the power supply rith single point regulation. The voltages available allow For output voltage other

第1章电工常识 1-1常用计算公式 1-2常用表 1-3常用电工设备图形

There are two main limit ations in the use of Hoo theory for compensator design. First, only full complex perturb ations() Cnm can be treated in a non-conservative way in an Ho robust st ability test. Second, robust performance can only be handled in a conservative way even for full complex perturbations since st ability and performance can not be separated in the Hoo structure