6.4 The comyn oil/water Separater
6.4 The Comyn oil/water Separater
6.4 The Comyn oil/water Separater WATER OUT MIXTURE INLET PIPE HE ATING STEAM NLET ORIFICE PLATE FITTED 始)小轻曲 TEST TROUGH AIR OPERATED TEST OIL OUTLET TROUGH VALVE WITH EMERGENCY HAND CLOSING 1爸之单1uE MIXTURE INLET 器 WATER MIXTURE R RECOVERED OIL WATER ESCAPE VALVE
6.4 The Comyn oil/water Separater
6. 4 The Comyn oil/water Separater General Operating Procedure Before pumping oily water into the separator it is important that the separator is completely filled with clean water. either direct from the sea or through the filling valve provided for this purpose. It is essential to keep the lower internal surfaces and outer chamber from becoming coated with oil
6.4 The Comyn oil/water Separater General Operating Procedure • Before pumping oily water into the separator it is important that the separator is completely filled with clean water, either direct from the sea or through the filling valve provided for this purpose. It is essential to keep the lower internal surfaces and outer chamber from becoming coated with oil
6.4 The Comyn oil/water Separater To fill the separator, slightly open scum-valve, also high level test and air release valve to vent the separator during filling. When water flows freely from these valves close and stop filling Close filling valve Before commencing to pump oily water through the separator, ensure that water discharge valve on ship's side is open to allow the water effluent to be pumped overboard
6.4 The Comyn oil/water Separater • To fill the separator, slightly open scum-valve, also high level test and air release valve to vent the separator during filling. When water flows freely from these valves close and stop filling. Close filling valve. • Before commencing to pump oily water through the separator, ensure that water discharge valve on ship's side is open, to allow the water effluent to be pumped overboard
6.4 The Comyn oil/water Separater Slightly open both mixture inlet test valve and high-level test valve. Leave these two valves slightly open during the working of the separator. mixture inlet test valve will indicate the nature of the mixture entering the separator. while high-level test valve will free the separator of air and also denote the presence of oil within the oil recovery dome
6.4 The Comyn oil/water Separater • Slightly open both mixture inlet test valve and high-level test valve. Leave these two valves slightly open during the working of the separator. Mixture inlet test valve will indicate the nature of the mixture entering the separator, while high-level test valve will free the separator of air and also denote the presence of oil within the oil recovery dome