Stud connectors圆柱 头焊钉连接件钉 161922Dia 8 8 The most widely used type Ceramic Weld ferrule fillet of connector is the headed stud,ranging in diameter from 13 to 25mm,and Weld penetration from 65 to 100 mm or more in length. Speed of welding process. This is carried out using a Stud positioned Slight lift and portable hand-tool, Large current in gun small arc and plunge connected via a control unit to mains or generator. Headed stud shear connector
Stud connectors 圆柱 头焊钉连接件钉 • The most widely used type of connector is the headed stud, ranging in diameter from 13 to 25mm, and from 65 to 100 mm or more in length. • Speed of welding process. This is carried out using a portable hand-tool, connected via a control unit to mains or generator. Headed stud shear connector
The push-out test enable the behaviour of different types and sizes of connector to be compared,the test must be standardized. Load per stud (kN) 80 40 2 3 Bearing stress Slip (mm) distribution on the Load-slip curve shank of stud
• The push-out test enable the behaviour of different types and sizes of connector to be compared, the test must be standardized. Load-slip curve Bearing stress distribution on the shank of stud