The safe and reliable long-term disposal of solid waste residues is an important component of integrated waste management. Solid waste residues are waste components that are not recycled, that remain after processing at a materials recovery facility, or that remain after the recovery of conversion products and/or energy. Historically, solid waste has been placed in the soil in the earth's surface or deposited in the oceans. Although ocean dumping of municipal solid waste was officially abandoned in the United States in 1933, it is now argued that many of the wastes now placed in landfills or on land could be used

Solid wastes include all solid or semisolid materials that the possessor no longer considers of sufficient value to retain. The management of these waste materials is the fundamental concern of all the activities encompassed in solid waste management—whether the planning level is local, regional or subregional, or state and federal. For this reason, it is important to know as much about municipal solid waste (MSW) as possible. The purpose of this chapter is to identify the sources, types, and composition of solid wastes

The control of particulates and VOCs is mostly accomplished by physical processes (cyclones, ESPs, filters, leakage control, vapor capture, condensation) that do not involve changing the chemical nature of the pollutant. Some particles and VOCs are chemically changed into harmless materials by combustion. This chapter and the next concern pollutants--sulfur oxides and nitrogen oxides that cannot be economically collected by physical means nor rendered harmless by combustion. Their control is largely chemical rather than physical. For this reason, these two chapters are more chemically oriented than the rest of the book

Solid wastes comprise all the wastes arising from human and animal activities that are normally solid and that are discarded as useless or unwanted. The term solid waste as used in this text is all-inclusive, encompassing the heterogeneous mass of throwaways from the urban community as well as the more homogeneous accumulation of agricultural, industrial, and mineral wastes. This book is focused on the urban setting, where the accumulation of solid wastes is a direct consequence of life

Vocabulary For the Bilingual Course of ENVIRONMENT ENGINEERING Department of Environment Science School of Resources and Environment Science EAST CHINA NORMAL UNIVERSITY

Contents Part I Wastewater Engineering 1 Wastewater Engineering: An Overview 2 Constituents in Wastewater 3 Analysis and Selection of Wastewater Flowrates and Constituent Loadings 4 Introduction to Process Analysis and Selection 5 Physical Unit Operation

ENVIRONMENTAL ENGINEERING DEPARTMENT OF ENVIRONMENT SCIENCES SCHOOL OF RESOURCES AND ENVIRONMENT SCIENCES EAST CHINA NORMAL UNIVERSITY

1、概述 2、设计依据 3、设计原则 4、化学品废水处理工艺流程 5、各处理设施主要处理设施参数,功能与选型 6、动力设备一览表

1.放射性基础知识 2.环境中的放射性 3.放射性辐射防护标准 4放射性测量实验室和检测仪器

①认识水资源和水质污染、水质监测对象和目的、监测项目 ②掌握水质监测方案的制定、水污染监测方案的制定