I Writing nodal equations by inspection determine v, in each circuit of Fig 2-32 6 A

1. In the circuit shown in the Fig 3-15, it is desired that 23 2v, a)Find the value of R that gives the desired relationship. b) Suppose that v,=-10V and v2=10V, find the magnitude of the currents through all resistors and the powers dissipated by all resistors

Basic Circuit Theory ChpterI Problems 1 For the circuit of Fig. 1-26 find: V, i, and the power absorbed by the load

In the chapter we shall present an introduction to nonlinear circuit analysis and shall examine a few interesting examples of that are used in practice. The principle of analysis will be emphasized. Graphical solution techniques will be given first. In addition, the basic concept of the phase plane shall be considered

In the chapter we first shall consider the nodal analysis and introduce the networks containing dependent sources. In addition later in the chapter we shall consider state(状态)- variable analysis

In this chapter we first introduce some of the basic definitions most often used in network graph theory and then implement some of the results of introductory graph theory to obtain general laws (KCL and KVL) which apply to any network

In the chapter we shall begin to look at more general and more powerful methods of circuit analysis -the Laplace transform techniques

In this chapter we continue our introduction to circuit analysis by studying periodic functions in both the time and frequency domains. Any periodic function may be represented as the sum of an infinite number of sine and cosine functions which are harmonically related. The response of the linear network to the general periodic forcing function may be obtained by superposing the partial responses

In this chapter we shall investigate some ways of characterizing two-port networks. Before we do this, we must consider some of the more general details that apply to all networks which have two port. In addition, we shall consider interconnec of two-

In this chapter we shall show how the phasor methods developed to analyze circuits operating under sinusoidal steady- state conditions can be applied to the study of three-phase ac circuits