In the chapter we first shall consider the nodal analysis and introduce the networks containing dependent sources. In addition later in the chapter we shall consider state(状态)- variable analysis

In this chapter we first introduce some of the basic definitions most often used in network graph theory and then implement some of the results of introductory graph theory to obtain general laws (KCL and KVL) which apply to any network

In the chapter we shall begin to look at more general and more powerful methods of circuit analysis -the Laplace transform techniques

In this chapter we continue our introduction to circuit analysis by studying periodic functions in both the time and frequency domains. Any periodic function may be represented as the sum of an infinite number of sine and cosine functions which are harmonically related. The response of the linear network to the general periodic forcing function may be obtained by superposing the partial responses

In this chapter we shall investigate some ways of characterizing two-port networks. Before we do this, we must consider some of the more general details that apply to all networks which have two port. In addition, we shall consider interconnec of two-

In this chapter we shall show how the phasor methods developed to analyze circuits operating under sinusoidal steady- state conditions can be applied to the study of three-phase ac circuits

In the chapter, we first define mutual inductance and study the methods whereby its effects are included in the circuit equations. We conclude with a study of the important characteristics of a linear transformer and an important approximation to a good iron-core transformer which is known as an ideal transformer

In this chapter we will introduce an important frequency is that network function or parameter reaches a maximum value. In certain simple a networks, this occurs when an impedance or admittance is purely real-a condition known as resonance

In this chapter we will develop the concept of average power as distinguished from instantaneous power. We will also be concerned with apparent power, power factor, and complex power. By the way, we discuss the maximum amount of power transfer from the source to the load

In this chapter we will extend the concepts which have been presented in the preceding chapter so as to develop general methods of phasor analysis for circuits which are under conditions of sinusoidal steady-state excitation. The methods are very similar to those for resistance circuits which were presented in Chap.2