Find the four Y parameters of the network shown in Fig

I If f(t)=100 for 04.(a) Calculate v at t=T/4.(b) Find the average power delivered by this waveform to a 5Q2 resistor 3 Let v(t)=3-3 cos(100 t-40)+4 sin(200 T t-10)+2.5 cos 300 tt V Find: (a)the average value Var;(b)the rms value V;(c)the period T; (d)v(18ms)

Let vs=100 cos a t V in the circuit shown in Fig. 9-12.(a) Find the equivalent parallel RLC circuit and then determine resonant frequency @r, Q, and v(t).(b) Find i, (t),i2(t), and i3(t) (c)Calculate the average power loss in the 10 kQ2 resistor and the maximum energy stored in the inductor

A cosine voltage is zero and increasing at t=-1 6ms; the next zero crossing occurs at t 4.65ms. (a)Calculate T, f, and @.(b) If v(0)=20V, find v(t).(c)By what angle does v(t) I(t)=5cos(t-110°)A? 2 For the sinusoidal waveform shown in

(a)Find V, in Fig. 8-20.(b)To what identical value should each of the 4Q2 resistors be changed so that V2 is 180 out of phase with the source voltage?

1 If the voltage across a 5F capacitor is 2te -V, find the current and the power 2 In 5s, the voltage across a 40mF capacitor changes from 160v to 220V. Calculating the average current through the capacitor

1 The switch in Fig.5-27 is opened at=0, Find i (0*) and v (0*) 1kΩ D100v 1k2 Fig. 5-27 For prob.1. The switch is closed at= 0 in Fig.5-28. Find i(*) and ic(0*) if the capacitor is initially

I Let L= 1.25 H in Fig. 6-11, and determine v(t)if v(0) 1(02)=20A L 0.05F ig 6-11 For prob. I 2(a)What value of L in the circuit of Fig 6-11 will result in a transient response of the form, v(t)

I Writing nodal equations by inspection determine v, in each circuit of Fig 2-32 6 A

1. In the circuit shown in the Fig 3-15, it is desired that 23 2v, a)Find the value of R that gives the desired relationship. b) Suppose that v,=-10V and v2=10V, find the magnitude of the currents through all resistors and the powers dissipated by all resistors