16.07 Dynamics Fall 2004 Version 1.2 Lecture d13- Newton's Second law for non-Inertial observers Inertial forces Inertial reference frames In the previous lecture, we derived an expression that related the accelerations observed using two reference frames, A and B, which are in relative motion with respect to each other aB+(aM/B)ry+29×(vA/B)xy2x2+gxTA/B+92×(xr4/B) Here, aA is the acceleration of particle A observed by one observer, and(aa/B)xys, is the acceleration of the same particle observed thethe other (moving) observer. It is clear that the acceleration of particle A will be different for each observer, unless all the other terms in the above expression are zero. This means that if one of the observers is inertial, the other observer will be inertial if and only if n=0, S=0 and 0. Thus, we conclude tha inertial frames can not rotate with respect to each other, i.e., n=0 and S=0, and inertial frames can not be accelerating with respect to each other, i. e. aB=0 Thus, inertial frames can only be at most in constant relative velocity with respect to each other. In practical terms, the closest that we are able to get to an inertial frame is one which is in constant relative velocity with respect to the most distant stars Note The earth as an inertial reference frame Given that the earth is rotating about d at the same time is rotating about the sun. it is clear that the earth can not be an inertial reference frame. However, we shall see that, for many applications, the error made in assuming that the earth is an inertial reference frame is small We can easily estimate the effect of earth's rotation. Consider for instance two reference frames yz and x'yz. The first frame is fixed and the second frame rotates with the earth
J. Peraire 16.07 Dynamics Fall 2004 Version 1.2 Lecture D13 - Newton’s Second Law for Non-Inertial Observers. Inertial Forces Inertial reference frames In the previous lecture, we derived an expression that related the accelerations observed using two reference frames, A and B, which are in relative motion with respect to each other. aA = aB + (aA/B)x′y′z ′ + 2Ω × (vA/B)x′y′z ′ + Ω˙ × rA/B + Ω × (Ω × rA/B) . (1) Here, aA is the acceleration of particle A observed by one observer, and (aA/B)x′y′z ′ is the acceleration of the same particle observed the the other (moving) observer. It is clear that the acceleration of particle A will be different for each observer, unless all the other terms in the above expression are zero. This means that if one of the observers is inertial, the other observer will be inertial if and only if Ω˙ = 0, Ω = 0 and aB = 0. Thus, we conclude that, • inertial frames can not rotate with respect to each other, i.e., Ω = 0 and Ω˙ = 0, and, • inertial frames can not be accelerating with respect to each other, i.e. aB = 0. Thus, inertial frames can only be at most in constant relative velocity with respect to each other. In practical terms, the closest that we are able to get to an inertial frame is one which is in constant relative velocity with respect to the most distant stars. Note The earth as an inertial reference frame Given that the earth is rotating about itself and at the same time is rotating about the sun, it is clear that the earth can not be an inertial reference frame. However, we shall see that, for many applications, the error made in assuming that the earth is an inertial reference frame is small. We can easily estimate the effect of earth’s rotation. Consider for instance two reference frames xyz and x ′y ′ z ′ . The first frame is fixed and the second frame rotates with the earth. 1
O三B In this case, n=0, since the earth rotates with a constant angular velocity, and ab=0 The centripetal acceleration, ac=QX(Q X TA/B), will depend on the point considered and is directe towards the axis of rotation. The modulus is given by ac=RQ2-cos L. For the earth, Q 7.3 x 10-0 rad /s, R=20 x 106 ft, and, if we consider, for instance, a point located at a latitude of L=40, ther ac≈0.08ft/s The Coriolis acceleration, acor= 2nX(UA/B)ry 2, depends on the velocity of A relative to the rotating earth and is zero if the point is not moving relative to the earth. On the other hand, for an aircraft fying i the east-west direction, at a speed of 250 m/s( 718 it/s), acor would be in the radial direction at A (local vertical) and pointing away from the center of the earth(upwards ) The magnitude will b acor≈0.10ft/s2 We see that these values, although not negligible in many situations, are still small when compared with the acceleration due to gravity of g= 32.2 ft/s Inertial forces We know that Newtons second law is only applicable when the motion is referred to inertial observers. This means that, before Newton's second law can be applied, the acceleration measured by a non-inertial observer needs to be transformed to an inertial acceleration. This transformation is achieved using the relative motion expressions derived in the previous lecture. An alternative approach is to extend Newtons second law to general non-inertial observers. This will lead to the concept of inertial forces. We shall see that, in many practical situations, it is convenient to work directly in the accelerated reference frame
In this case, Ω˙ = 0, since the earth rotates with a constant angular velocity, and aB = 0. The centripetal acceleration, ac = Ω × (Ω × rA/B), will depend on the point considered and is directed towards the axis of rotation. The modulus is given by ac = RΩ 2 cosL. For the earth, Ω ≈ 7.3 × 10−5 rad/s, R = 20 × 106 ft, and, if we consider, for instance, a point located at a latitude of L = 40o , then, ac ≈ 0.08ft/s2 . The Coriolis acceleration, acor = 2Ω × (vA/B)x′y′z ′ , depends on the velocity of A relative to the rotating earth and is zero if the point is not moving relative to the earth. On the other hand, for an aircraft flying in the east–west direction, at a speed of 250 m/s (≈ 718 ft/s), acor would be in the radial direction at A (local vertical) and pointing away from the center of the earth (upwards). The magnitude will be acor ≈ 0.10ft/s2 . We see that these values, although not negligible in many situations, are still small when compared with the acceleration due to gravity of g = 32.2 ft/s2 . Inertial forces We know that Newton’s second law is only applicable when the motion is referred to inertial observers. This means that, before Newton’s second law can be applied, the acceleration measured by a non-inertial observer needs to be transformed to an inertial acceleration. This transformation is achieved using the relative motion expressions derived in the previous lecture. An alternative approach is to extend Newton’s second law to general non-inertial observers. This will lead to the concept of inertial forces. We shall see that, in many practical situations, it is convenient to work directly in the accelerated reference frame. 2
Translating observers We consider an inertial observer O and, to start, a translating(possibly accelerating) observer B A/B B Recall that the expression relating the accelerations of a particle A as observed by o, aA, and as observed aB+aA/B Since O is inertial, he or she will be able to verify Newtons second law. Thus, if m is the mass of particle F=m (aB+aA/B) here F is the vector sum of all the forces acting on A. The above equation can be re-writte and, defining the inertial force, Inertial,as Inertial= -maB (5) we can combine the external and inertial forces into the apparent force, Fapparent, to obtain Apparent F+Inertial= maA/ Thus, we see that, if in addition to the external force, we include the inertial force, then observer B, will be able to verify a"modified"Newtons second law. That is, for observer B, the apparent force is equal to the mass times the observed acceleration. This concept is sometimes called D'Alambert's principle, and the inertial force is sometimes referred to as the d'alambert force Although inertial forces manifest themselves as real forces to non-inertial observers, the are sometimes called fictitious. They are called fictitious forces because they do not result from interactions with other bodies, like other forces(e.g. gravity, electromagnetic, contact, etc. ) Fictitious forces"exist"because of the acceleration of the observer Note that when the acceleration of B with respect to O, aB, is zero (i.e. B moves, at most, with a constant velocity with respect to O), then aA =aA/B, which means that B is also inertial, and, hence, Newtons lay verified with respect to B
Translating observers We consider an inertial observer O and, to start, a translating (possibly accelerating) observer B. Recall that the expression relating the accelerations of a particle A as observed by O, aA, and as observed by B, aA/B, is aA = aB + aA/B . (2) Since O is inertial, he or she will be able to verify Newton’s second law. Thus, if m is the mass of particle A, we will have, F = m aA = m (aB + aA/B) , (3) where F is the vector sum of all the forces acting on A. The above equation can be re-written as F − m aB = m aA/B , (4) and, defining the inertial force, Finertial, as Finertial = −m aB , (5) we can combine the external and inertial forces into the apparent force, Fapparent, to obtain Fapparent ≡ F + Finertial = m aA/B . Thus, we see that, if in addition to the external force, we include the inertial force, then observer B, will be able to verify a “modified” Newton’s second law. That is, for observer B, the apparent force is equal to the mass times the observed acceleration. This concept is sometimes called D’Alambert’s principle, and the inertial force is sometimes referred to as the D’Alambert force. Although inertial forces manifest themselves as real forces to non-inertial observers, the are sometimes called fictitious. They are called fictitious forces because they do not result from interactions with other bodies, like other forces (e.g. gravity, electromagnetic, contact, etc.). Fictitious forces “exist” because of the acceleration of the observer. Note that when the acceleration of B with respect to O, aB, is zero (i.e. B moves, at most, with a constant velocity with respect to O), then aA = aA/B, which means that B is also inertial, and, hence, Newton’s law is verified with respect to B. 3
Example Elevator a boy of weight W= mg is standing on a scale inside an elevator which is moving with an acceleration a We want to determine the reading on the scale B y▲ 入 This problem can be approached in two ways Here, we look at the problem from the perspective of an inertial observer who is outside the elevator and sees the elevator passing by with an acceleration a. For this observer, the sum of the forces on the boy will have to equal the mass of the boy times its inertial acceleration aA = a. Thus, if R is the reaction force that the scale exerts on the boy, we will have for the vertical direction -mg+R=ma or,R=m(g+a) Here, we look at the problem from the perspective of an accelerated observer, B, who is inside the elevator The acceleration of this observer with respect to the inertial observer O, is ab=a. On the other hand relative to B, the boy will not move. Thus, observer B will observe that aA/B=0. We have that F=(-mg+R)3 and Inertial=-maB. Thus, using expression(4)and solving for the vertical direction, +R which obviously gives R= m(g +a) We also see that, if the acceleration is downwards and equal to the gravity acceleration, a=-93 (i.e. fre fall), then the reaction force, R, will be zero, as expected
Example Elevator A boy of weight W = mg is standing on a scale inside an elevator which is moving with an acceleration a. We want to determine the reading on the scale. This problem can be approached in two ways: Inertial observer Here, we look at the problem from the perspective of an inertial observer who is outside the elevator and sees the elevator passing by with an acceleration a. For this observer, the sum of the forces on the boy will have to equal the mass of the boy times its inertial acceleration aA = a. Thus, if R is the reaction force that the scale exerts on the boy, we will have for the vertical direction, −mg + R = ma , or, R = m(g + a). Accelerated observer Here, we look at the problem from the perspective of an accelerated observer, B, who is inside the elevator. The acceleration of this observer with respect to the inertial observer O, is aB = a. On the other hand, relative to B, the boy will not move. Thus, observer B will observe that aA/B = 0. We have that F = (−mg + R)j and Finertial = −maB. Thus, using expression (4) and solving for the vertical direction, −mg + R − ma = 0, which obviously gives R = m(g + a). We also see that, if the acceleration is downwards and equal to the gravity acceleration, a = −gj (i.e. free fall), then the reaction force, R, will be zero, as expected. 4
Translating/Rotating observers In the more general situation in which the accelerated observer can also rotate, we can also define additional inertial forces so that Newtons second law is satisfied for the accelerating observer, but in this case, the inertial forces must account for the rotational effects k TA/B y Recall that the expression relating the acceleration of a particle A, observed by o, aa, and observed by the translating/rotating observer, B,(aAB)ry2,is aB+(aA/B)xy2/+2n X(UA/B)ry2+nX TA/B+nX(&xTA/B) (6) Since O is inertial, he or she will be able to verify Newtons second law. Thus, if m is the mass of particle F=maa where F is the vector sum of all the forces acting on A. Inserting(6) into the above equation and rearranging he terms, we have F-maB-2mSX(UA/B)ry2/ TA/B-mnx(&X TA/B)=m(aa/B)ry If we define the inertial force, Inertial, as Finertial=-maB-2mnX(UA/B)ry2'-mnXrAB-mnX(Q TA/B), hen. we can write Apparent= F+ Inertial= m(aa/B)ry2 We know that the centripetal acceleration, Sx(nxra/B), points towards the axis of rotation. The inertial force associated with it, Fc=-mn X(nxra/B), is a force that points away from the axis of rotation, and hence, it is sometimes called the centrifugal force. The inertial force for the general translating/rotating observer is comprised of various other terms which will be illustrated in the following lectures
Translating/Rotating observers In the more general situation in which the accelerated observer can also rotate, we can also define additional inertial forces so that Newton’s second law is satisfied for the accelerating observer, but in this case, the inertial forces must account for the rotational effects. Recall that the expression relating the acceleration of a particle A, observed by O, aA, and observed by the translating/rotating observer, B, (aA/B)x′y′z ′ , is aA = aB + (aA/B)x′y ′z ′ + 2Ω × (vA/B)x′y ′z ′ + Ω˙ × rA/B + Ω × (Ω × rA/B) . (6) Since O is inertial, he or she will be able to verify Newton’s second law. Thus, if m is the mass of particle A, we will have, F = maA , (7) where F is the vector sum of all the forces acting on A. Inserting (6) into the above equation and rearranging the terms, we have F − m aB − 2m Ω × (vA/B)x′y ′z ′ − m Ω˙ × rA/B − m Ω × (Ω × rA/B) = m (aA/B)x′y ′z ′ . (8) If we define the inertial force, Finertial, as Finertial = −m aB − 2m Ω × (vA/B)x′y′z ′ − m Ω˙ × rA/B − m Ω × (Ω × rA/B), (9) then, we can write Fapparent ≡ F + Finertial = m(aA/B)x′y′z ′ . We know that the centripetal acceleration, Ω ×(Ω ×rA/B), points towards the axis of rotation. The inertial force associated with it, Fc = −mΩ ×(Ω×rA/B), is a force that points away from the axis of rotation, and, hence, it is sometimes called the centrifugal force. The inertial force for the general translating/rotating observer is comprised of various other terms which will be illustrated in the following lectures. 5