1、掌握组合体的组成方式 2、熟练掌握组合体的画法 3、熟练掌握组合体读图的方法

Computation of Stress, Crack width and Reflection of RC Flexural Members  Characteristics of use of reinforced concrete beam during the calculation.  The concept of transformed section and the geometric characteristics.  The stress state of reinforced concrete short-term checking.  Flexural members of the cracks and the maximum width of crack.  Deformation of flexural members.  Durability of concrete structures

bias components are the mechanical characteristics of cross sections and two failure modes, Boundaries and determine the size of bias conditions; Familiar with eccentric compression of the second-order effect and calculation; Eccentric rectangular cross-section bearing capacity of compression members is calculated, Including the formula, the formula of the applicable conditions of reinforcement and non-symmetrical Design and reinforcement of the cross-section symmetrical cross section for review; I-shaped, T shaped eccentric compression AND CIVIL ENGINEERING Calculation method; Circular section eccentric compression member cross section design and review; Eccentric compression reinforcement of the structure and reasonable layout requirements

With a longitudinal axis of steel stirrups and the general failure mode of compression members, bearing capacity; Longitudinal and spiral reinforcement with stirrups failure modes of axial The concept of stability factor and its influencing factors; Analysis of the core concrete strength and strength calculation; Ordinary hoops column, spiral column reinforcement stirrup features and construction requirements

Oblique cross-section flexural members of the mechanical characteristics and failure modes. Oblique section of bending members the main factor for shear strength. Flexural oblique shear strength formula for conditions. Such a high degree of web reinforcement beams of the preliminary design steps. Resisting moment mapping. Check all of bearing capacity and structural requirements. Construction oblique shear strength calculations

Principle of Structure Design and Calculation Based on Probabilostic Limit State Method History and basic concept of methods for calculation and design Functional requirement of structure Conception of limit state, probabilistic limit state design method Design method, principles, expressions and factors of existing Codes Strength of Materials, action classifications, action combination

Basic Concepts of Reinforced Concrete Structure and Physical and Mechanical Properties of Materials Basic Concepts of Reinforced Concrete(RC) Strength and deformation of concrete under various stress conditions Type ,Grade and Mechanical Properties of Steel Reinforcement Bond between concrete and steel reinforcement

长沙理工大学：《结构设计原理》课程教学资源（PPT课件）Chapter 0 General Introduction

同济大学：《钢和混凝土组合结构设计原理与应用》课程教学资源（PPT课件）lecture-Introduction to Structural Fire Engineering

同济大学：《钢和混凝土组合结构设计原理与应用》课程教学资源（PPT课件）lecture-Composite Steel-Concrete Shear Walls